HUAWEI MA5608T Smartax OLT 1 x MCUD1 Main 10G Uplink Control 1 x MPWD AC/DC Power Supply

The MA5608T has a strong adaptability to the environment and can be deployed quickly. In FTTx networks, the OLT is moved closer to the user side, which can save backbone optical cable resources. This solves the problem of a few users and long access distance, when FTTx services are applied in an area with a low population density.

· Deployed at the remote end, including the base stations (BSs) and outdoor environments

· 2 U high, and supports a maximum of two service boards

· Connected to MxUs or ONTs and used in FTTB/C and FTTH scenarios

· Connected to xDSL terminals and phones and used in the MSAN/DSLAM scenario

Chassis supports 2 Service Slots

One power slot, can supply with 2 ports DC redundancy, or AC and DC redundancy (battery)

Two slot redundancy for main control board

Support GPON, EPON and P2P (Optical Access);xDSL and POTS(Copper Access)

Support GPON & EPON simultaneously

Support 8-GPON port interface card GPBD, 16-GPON port interface card GPFD

Support GPON split ration 1:128

Support GE uplink (embedded in MCUD main control board) or 10GE uplink (embedded in MCUD1 main control board)

MA5608T Software Version available at V800R011,R013 ,R015,R016 and others

MA5608T configuration:

2 MCUD of control and uplink integreated board(MCUD1 10G Uplink for Option)

1 MPWD AC & DC Power Board  OR 1 MPWC Dual DC power board  (AC to DC Power Converter have to buy separate)

1 GPON or EPON 8 ports board with 8 Modules; (GPFD EPFD 16Ports for Option)

Acessories: Power cable, earth cable, patchcords, banding ribbon, screws etc

Product Features 

Optical Access

· Supports a split ratio of 1:128.

· Support small form-factor pluggable (SFP) optical module of Class B+ or Class C+ and XFP optical module, which can be used in different scenarios.

· High-density 48 single-fiber bi-directional or 24 two-fiber bi-directional GE/FE P2P optical access is supported.

Full Service Access

· Supports the High-Performance Multicast Service. The device employs the multicast technology to provide IP video services, including live TV and QVoD, for carriers. By introducing the multicast technology, the network device can manage, control, and forward IP video services and thus meets carriers’ requirements for provisioning IP video service.

· The MA5608Thas completed its interoperability test with all mainstream NGN/IMSs.

· Connection to the NGN/IMS network through SIP or H.248, implementing the VoIP service (including the voice, fax, and modem services).

· The MA5608T supports reconstruction of traditional voice devices such as the N*64K private line device and ISDN PRI PBX, implementing the ALL IP architecture.

· Implements base station access solution by using MA5608T (OLT)+MDU. And the MA5608T supports clock synchronization in the base station access scenario.

· The MPLS PWE3 provides the E2E reliability and quality assurance for the service.

Integrated Capability of Access and Convergence

NE Convergence

· The MA5608T features powerful access and convergence capability. In the downstream direction, it supports cascading to other devices through the GE or 10GE port. In the upstream direction, it supports connection to the IP/MPLS network through the GE or 10GE port. It also supports dual homing to the BRAS through direct connection.

Product application

FTTH/FTTB/FTTC Network  Application

Voice Service Network Application